Getting Started Guide (Arma 3)
This Getting Started Guide for ArmA 3 provides basic guidance on getting started with ArmA 3 at United Operations. It covers the proper synchronization to our modpack using Arma3Sync, how to connect to our servers, and the important things you need to know for your first play session at UO as well as further reading.
- 1 Prerequisites
- 2 Addon Synchronization - ArmA3Sync
- 3 Connecting to the Server - General Info
- 4 Your First ArmA 3 Session
- 5 Troubleshooting
- 6 Recommended Reading
Before you start playing ArmA 3 with us you'll need to acquire a few prerequisites: Teamspeak 3 for in-game and out-of-game communication and a forum account, you will also need to link your Teamspeak profile with your forum account. For a walkthrough on installing and setting up our prerequisites see:
You will need also need ArmA3Sync in order to download our modset. Follow the link below to download the application. The currently recommended application is ArmA3Sync.
Addon Synchronization - ArmA3Sync
Before you can successfully connect to our ArmA 3 servers you need to download our modpack. If you do not already have any of our mods at all this can take a considerable amount of time as the mods you need to download are considerable in size. If you have played elsewhere with mods before coming to play with us there is a likelyhood you already have some of our mods, in that event we will simply re-use those mods and the download time will be smaller.
Please launch the game at least once normally, through Steam, to ensure that all updates are processed fully. Do this before you continue with this guide or attempt to install any mods, and after all updates to ArmA 3.
Step 1 - Download & Install ArmA3Sync
Download ArmA3Sync from here http://www.armaholic.com/page.php?id=22199
This part should be fairly easy. Just run through the prompts and once it is installed be sure to launch it. After you have launched ARMA3Sync it will ask you to locate your ARMA3 game. Find your ARMA installation and select your ARMA3.exe and press ok.
Your ARMA3Sync should now look something similar to this:
Step 2 - Setting Up Repository
Select the Repositories button here:
After this select "Add a new repository" here:
Enter the following link in to Public auto-config url http://sync.unitedoperations.net/.a3s/autoconfig and then press import:
It should now say it was a success and look like this:
Hit ok and the box should now close. Now select the "Connect to repository" button located here:
And the page should now update to look similar to this:
Step 3 - Checking Addons
After the modset's page has opened select the "Check for Addons" icon located here:
After a few seconds it should update the page to look similar to this:
Click on the "Advanced configuration" button and change the "Maximum number of connections" to 8:
Press select all (You can deselect @UOTest_A3 as we do not use this) and then press the play button on the left, here:
Your mods should now start to update. Your mods will eventually be downloaded and once it is complete it should say 'Finished':
And you are done! Your mods have been updated and you are ready to launch your game.
Current noted bugs:
You might run into a HTTP error like below:
Removed offending files (for each reported file, make sure you remove the *.part file as well). Resync should resolve the issue.
Step 4 - Connecting with ArmA3Sync
Now you have the UO modset installed, move over to the "Addon Options" tab. You should see something similar to below, you need at least 1 directory in the "Addon Search Directories" box which normally should be the game installed directory.
Go to the "Addons" tab. You should see all mods you've installed are listed on the "Available Addons" window on the left. On the right "Addon Groups" window, right click within the window a content menu with "Add Group" will pop up. Add a new group.
The new group should appear, after that drag the UO modset from the left window to the new group. Make sure you have the group checked by ticking the left box. You should have something similar to below: (The UO mods can be just under the "Arma 3" group, I have subgroups defined but they are optional for easy mod management)
Go to the "Online" tab. Here you can add the UO game servers by clicking the blue "+" icon on the right. Check the next section for server password.
You can now launch the game by selecting the newly added server and click "Start Game".
Note: Due to recent changes to Arma 3 - 1.44, connecting to any online servers with launcher other than the official one will prompt you to start BattlEye separately. More details in BI's forum: http://forums.bistudio.com/showthread.php?190426-BattlEye-service-implementation&p=2910511#post2910511
To avoid being prompted to start BattlEye before A3. You can change the "Arma III Executable Location" to use arma3battleye.exe and put "2 1" manually in the "Additional Parameters" box. That should start BattlEye before the game is launch and have BE checked for new updates. If you want to remove the black command prompt all together, use "2 1 1" instead.
Optional - Bypassing BattlEye
There are times the primary game server will temporarily disable BattlEye and this will be announced in the forum. To connect to the primary server without BattlEye, just leave the "Launcher Options" as per section above.
- Use "arma3.exe" instead of "arma3battleye.exe"
- Leave "Additional Parameters" empty
Connecting to the Server - General Info
In most cases you can directly join our server with Play withSix, you do this simply by clicking the JOIN button. or with Arma 3 Sync by selecting the Primary server in the bottom bar and clicking Start Game. If this, for whatever reason, does not work or you have a LAUNCH/Start Game button instead follow the instructions below to find and connect to our server.
In order to manually connect to our servers you will first need to obtain our server password, for most servers this is the same as our Teamspeak 3 password, however, in the event this is not working you can find the passwords as well as IP addresses and rules for all our servers at this link: .
Once you have the password simple start ArmA 3, navigate to the Multiplayer server browser, click the button labeled "Remote" in the bottom right-hand corner and enter the following information into the corresponding boxes:
- IP: arma3.unitedoperations.net
- Port: 2402
Then click OK. This should yield a single result, our Primary server, in the server browser; simple double-click this result and enter the password you received earlier to connect. Once you have connected to our server please ensure you join the correct game channel on Teamspeak, failure to be on Teamspeak will result in you being kicked, not necessarily with any warning.
If the event you cannot find our server using the above method please contact a Regular on our Teamspeak for assistance.
Your First ArmA 3 Session
When you first connect to our server you will be presented with the slotting screen. Here at UO we allow the mission commander to select which slots he wishes to play his mission with; at the start of a mission one player will choose to command a mission then he will call which slots are available to be picked, once these slots have been called you will be permitted to start taking any of these slots, for your first few games at UO please restrict yourself to an infantry team-member and steer clear of high-value assets like aircraft and leaderships slots as these often require a lot more skill and experience and can potentially ruin the game for everyone if misused. If a game is already in process choose a slot in a squad that already has a leader.
It will likely take a few games for you learn the ropes of how we play here at United Operations, however, as long as you don't break any of our rules and abide by the United Operations Charter you should be fine. Simply let your fireteam leader know you are new and most of the time they will be very happy to help you out.
Having issues installing our modpack? Hop on over to our forums, we'll be happy to help you out.